View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
259 | [mSLDev] General (other) | major | always | 2015-10-31 20:45 | 2015-10-31 20:45 |
|
|||||
Reporter: | Denny | Platform: | Windows | ||
Assigned To: | OS: | Windows 10 | |||
Priority: | high | OS Version: | 10 | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | Check if it's a beta version | ||||
mIRC Version: | 7.38 | ||||
|
|||||
Summary: | mSLDev high cpu usage | ||||
Description: | Version 0.4.0.116 uses around 30% of my cpu whereas 0.3.1.3186 uses <1% | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
258 | [mSLDev] General (other) | major | sometimes | 2015-10-19 08:43 | 2015-10-19 08:43 |
|
|||||
Reporter: | Terror_nisse | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | immediate | OS Version: | (6.1) | ||
Status: | new | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.43 | ||||
|
|||||
Summary: | Deletion of scripts | ||||
Description: | I have seen it been reported before, but it seems mSLDev OR perhaps me, have a mistakes which resets the scripts back to an earlier date. I know for a fact this is a case, but I am not sure and cant tell if it is because I keep switching back and forth between the default and msldev scripts editor. (Since the old is a habbit for me). And by the time I realize something is gone, I dont remember wheter or not I used the old one or the new one. | ||||
Steps To Reproduce: | |||||
Additional Information: | Please help me figure this out, or make some sort of reminder-ish if you keep switching, or make it update the actual script better. Please /ms send Terror_nisse with answer :) As I tend to forget I have posted this xD | ||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
257 | [mSLDev] Future Suggestions | minor | N/A | 2015-10-19 08:37 | 2015-10-19 08:37 |
|
|||||
Reporter: | Terror_nisse | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.43 | ||||
|
|||||
Summary: | A few suggestions | ||||
Description: | - The original mIRC scripts editor is set default to always be on top of mIRC, but not other programs. This should be a option with mSLDev aswell imo. - A direct pastebin upload of a script (mpaste might be a good option) - For some it might be cool with som general stats of how much you have done? total KB of code, I dont know. General idea. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
256 | [mSLDev] Syntax Checking | major | always | 2015-09-26 16:08 | 2015-09-26 16:08 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Add support for parseline events | ||||
Description: | http://www.mirc.com/whatsnew.txt [^] | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
255 | [mSLDev] Future Suggestions | feature | N/A | 2015-03-03 17:05 | 2015-03-03 17:05 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Add support for popups tab. | ||||
Description: | Would be nice if we could have mSLDev check the scripts in the popups tab. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
254 | [mSLDev] Future Suggestions | feature | N/A | 2015-01-10 04:10 | 2015-01-10 04:10 |
|
|||||
Reporter: | Meta | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | N of M match counter for find/replace | ||||
Description: | A N of M (where M is the total number of matches and N is the current match index) would be a helpful feature. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
250 | [mSLDev] GUI Related | minor | always | 2014-11-17 18:11 | 2014-11-17 18:11 |
|
|||||
Reporter: | Meta | Platform: | Win8 64-bit | ||
Assigned To: | OS: | Windows 8 | |||
Priority: | normal | OS Version: | (6.2) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Vertical scrollbar resize glitches when unfolding code in split views | ||||
Description: | Unfolding code at the bottom of a split view can cause one of two different issues, depending on which split frame the code is unfolded in: 1. If code at the bottom of the primary frame is unfolded, the secondary frame's scrollbar will fail to resize to fit the expanded code. (Adding or removing a line will cause the secondary scrollbar to update.) 2. If code at the bottom of the secondary frame is unfolded, the vertical scrollbars of both views will fail to resize. (Adding or removing a line will have no effect.) | ||||
Steps To Reproduce: | 1. Create or open a script file with a foldable block of code near the bottom of text area (so that when that code is unfolded, it extends past the bottom and should cause the vertical scrollbar to resize). Fold that code if necessary. 2. Enable one of the split views. 3. Unfold the folded block of code described in step 1 in the primary split frame. Refold the code and repeat for the secondary split view. | ||||
Additional Information: | Version 0.4.0.117 | ||||
System Description | This profile is for problems on the 64-bit version of Microsoft Windows 8. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
249 | [mSLDev] GUI Related | minor | always | 2014-10-25 01:49 | 2014-10-29 19:51 |
|
|||||
Reporter: | Meta | Platform: | Win8 64-bit | ||
Assigned To: | OS: | Windows 8 | |||
Priority: | normal | OS Version: | (6.2) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Default text color reverts to black | ||||
Description: | If the default text (foreground) color is set to something other than black (rgb 0, 0, 0), it may display as black when creating a new script file or opening mSLDev until navigating to Colors and Fonts in the Options menu. Video of bug included. | ||||
Steps To Reproduce: | 1. Set a default text color to something easily distinguishable from black 2. Create a new script file 3. Type some code that would use the default text color, (for example: "alias test echo -ga this is some test..."), and press "Enter". | ||||
Additional Information: | mSLDev Version 0.4.0.117 | ||||
System Description | This profile is for problems on the 64-bit version of Microsoft Windows 8. | ||||
Attached Files: |
blackTextGlitch.mp4 (953,547) 2014-10-25 02:25 http://www.msldev.com/bugs/file_download.php?file_id=13&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
248 | [mSLDev] GUI Related | minor | always | 2014-10-25 01:48 | 2014-10-25 01:48 |
|
|||||
Reporter: | Meta | Platform: | Win8 64-bit | ||
Assigned To: | OS: | Windows 8 | |||
Priority: | normal | OS Version: | (6.2) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Default text color reverts to black | ||||
Description: | If the default text (foreground) color is set to something other than black (rgb 0, 0, 0), it may display as black when creating a new script file or opening mSLDev until navigating to Colors and Fonts in the Options menu. Video of bug included. | ||||
Steps To Reproduce: | 1. Set a default text color to something easily distinguishable from black 2. Create a new script file 3. Type some code that would use the default text color, (for example: "alias test echo -ga this is some test..."), and press "Enter". | ||||
Additional Information: | mSLDev Version 0.4.0.117 | ||||
System Description | This profile is for problems on the 64-bit version of Microsoft Windows 8. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
247 | [mSLDev] Future Suggestions | minor | N/A | 2014-10-07 20:45 | 2014-10-07 20:45 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Cancel autocomplete of ( ) pair in front of variables, similar to ident behavior | ||||
Description: | Currently when typing identifiers in front of other identifiers, e.g. having $nick and typing $qt( in front for $qt(|$nick the autocomplete of the matching ')' is cancelled. This behavior should be expanded to variables to prevent cases like $qt(|)%nick from occurring frequently. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
246 | [mSLDev] Future Suggestions | minor | have not tried | 2014-09-30 16:44 | 2014-09-30 17:07 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Improvement of the dropdown combo for quick access | ||||
Description: | I don't like it, it's annoying to click on it to get a very long list, you have to scroll a lot and the reading is not very clear, it also takes severals seconds to load, for some reasons. I propose a new window, which would typically be pinned under the sync view on the left with a second treeview in it: +on start -1 (line N) -2 (second on start event if any..) (line N) +on sockread -matchtext1 (line N) -matchtext2 (line N) +alias name -1 (line N) -2 (second alias definition for that name if any) (line N) and double clicking on item would do the same job as the current dropdown combo | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
245 | [mSLDev] Future Suggestions | feature | N/A | 2014-09-28 15:11 | 2014-09-28 15:11 |
|
|||||
Reporter: | Travis | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Autocomplete /commands | ||||
Description: | It would be very useful to autocomplete commands the same way identifiers are suggested when typing them. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
244 | [mSLDev] AutoComplete | tweak | always | 2014-09-28 15:06 | 2014-09-28 15:06 |
|
|||||
Reporter: | Travis | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Idents that have parameters should show brackets in the autocomplete menu (e.g. $nick() vs $nick) | ||||
Description: | Identifiers that take parameters should show the brackets in the autocomplete menu. Currently there are two menu options for autocompleting $nick, and they both appear the same except for a different color image of '$'. However, one of them inserts $nick and the other inserts $nick(). Two things should be changed: * $nick should be sorted before $nick() (it's not currently in 0.4.0.117) so that typing $nick and hitting enter won't automatically insert brackets * $nick() should show the brackets in the autocomplete suggestion | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
243 | [mSLDev] AutoComplete | minor | always | 2014-09-28 14:56 | 2014-09-28 14:56 |
|
|||||
Reporter: | Travis | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Backspacing to $ for autocomplete results in $$ | ||||
Description: | When typing an identifier and backspacing all the way to $, autocompleting anything will result in $$ prefixed identifiers. | ||||
Steps To Reproduce: | alias FOO return ;--------------------------- ;type: alias bar noop $F| ;then backspace so you have: alias bar noop $| ;select $FOO and it results in $$FOO | ||||
Additional Information: | Typing F after backspacing to $ and then selecting $FOO would result in $FOO as expected. It doesn't matter what is selected for autocompletion after backspacing to $, they all result in $$ | ||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
242 | [mSLDev] AutoComplete | minor | always | 2014-09-28 14:44 | 2014-09-28 14:44 |
|
|||||
Reporter: | Travis | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Autocompleting capitalized aliases can give inconsistent results (0.4.0.117) | ||||
Description: | Typing the name in lowercase of an alias that's all uppercase letters completes the remaining characters in uppercase but leaves the part that's already typed as lowercase. The entire thing should be uppercase. | ||||
Steps To Reproduce: | alias FOOBAR return ;type: alias bar return $foo| ;the pipes signify the cursor position ;selecting $FOOBAR from the suggested list results in the following: ;alias bar return $fooBAR| ;the desired result: ;alias bar return $FOOBAR| | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
181 | [mSLDev] Syntax Highlighting | minor | have not tried | 2013-08-10 04:02 | 2014-09-28 14:27 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | low | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | && and || not highlighted inside $iif() condition (0.4.0.94) | ||||
Description: | The brackets surrounding the conditions are highlighted the same as /if, however the '&&' appears as plain text. | ||||
Steps To Reproduce: | alias foobar noop $iif((condition) && (condition), $foo) | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
241 | [mSLDev] General (other) | minor | have not tried | 2014-09-28 12:12 | 2014-09-28 12:12 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | nested identifier and calltip | ||||
Description: | when you have nested identifiers/calltips, hitting backspace cancel the current calltip, but the next backspace will not cancel the outer, nor it will delete the text. I'm not using the option which automatically complete the ) for a (, type manually: alias test noop $gettok($hget(test,test and from this, hit backspace I'm not sure what you consider the correct behavior nor i can remember how it worked before. Imo, backspace should delete the text, not switch to the previous calltip, we should be able to switch to previous (or even next) calltip anyway because it doesn't have much use... | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
240 | [mSLDev] General (other) | minor | always | 2014-09-27 02:13 | 2014-09-27 02:43 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | Check if it's a beta version | ||||
mIRC Version: | 7.34 | ||||
|
|||||
Summary: | Using variable declaration on same line as opening block code, followed by $&, results in terrible block management | ||||
Description: | For some reason, you cannot declare a variable on the same line as an opening alias block, and then proceed to use $& to concatenate the lines together. | ||||
Steps To Reproduce: | Create a new line, or a new script file, and type the following: alias varwhat { var %1 = This, $& %2 = Will, $& %3 = Not Work echo -a %1 %2 %3 } You will notice that there will be a block indicator around the %3. Sometimes, the block even showed up at the 'echo' statement (if I pushed the var %1 down one line, then backspaced up, it would variably 'block' the echo statement). | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
msldevbug.jpg (9,871) 2014-09-27 02:13 http://www.msldev.com/bugs/file_download.php?file_id=12&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
239 | [mSLDev] Future Suggestions | feature | N/A | 2014-09-27 00:28 | 2014-09-27 00:28 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | v7.34 | ||||
|
|||||
Summary: | Ability to clicking line numbers to highlight single, or click-drag to highlight multiple, lines | ||||
Description: | mSLDev should feature the ability to click on a single line, in the line counter for the code window, in order to highlight that line. mSLDev should also allow the user to click and hold on a line number, and drag up or down to select multiple lines. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
220 | [mSLDev] GUI Related | minor | always | 2014-01-20 02:29 | 2014-09-26 23:23 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Exiting with the application window maximized results in unexpected behavior during next load | ||||
Description: | If I exit the app when it is maximized, the next time I start mSLDev it will be on the top-left portion of my screen, locked there, with no titlebar showing and only taking up about 200x200 pixels. The only way to fix it is to click the taskbar button to minimize and then again to restore it, and only then does it restore to proper screen max. Now, if I close the mSLDev while it's anything BUT maximized, and then open it, it will open fine; only time I get this problem is if I exit out of it while it's maximized. Resolution: 1920x1080; 24" monitor | ||||
Steps To Reproduce: | 1. Start mSLDev 2. Maximize mSLDev window 3. Exit mSLDev 4. Start mSLDev again | ||||
Additional Information: | This happens every single time for me, and is easily reproduced. | ||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
238 | [mSLDev] Syntax Checking | minor | always | 2014-09-23 09:50 | 2014-09-23 20:56 |
|
|||||
Reporter: | Denny | Platform: | Win7 32-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | Closing brace not found when using $& | ||||
Description: | mSLDev cannot find the opening brace when using an if-state (have not tried with other statements) with $& at the end of the state and continuing on the next line with three or more statements | ||||
Steps To Reproduce: | Test code: alias test { if (test1) $& && (test2) && (test3) && (test4) { echo -ag test } } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 32-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
237 | [mSLDev] General (other) | minor | have not tried | 2014-09-15 05:46 | 2014-09-17 00:37 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | highlighting of { } | ||||
Description: | Putting your cursor around a { or a } no longer highlight the corresponding { } tested on 0.4.0.110 | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
236 | [mSLDev] Future Suggestions | minor | have not tried | 2014-09-12 10:49 | 2014-09-12 10:49 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Minimize msldev in the tray | ||||
Description: | self explanatory, add an option in alt + o to minimize to the tray, if not enabled, shift + minimize still put it in the tray, if enabled, shift minimize does NOT send it to the tray | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
178 | [mSLDev] AutoComplete | minor | always | 2013-07-11 17:31 | 2014-09-12 03:41 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | variables name "%1-" | ||||
Description: | I have a variable called %1-, when I hit '%', the autocompletion suggests %1-, but after hitting '1', it doesn't keep with suggesting %1- | ||||
Steps To Reproduce: | alias name { var %1- 1 echo -a | } | is the cursor, hit '%' and '1' | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
209 | [mSLDev] Future Suggestions | feature | N/A | 2014-01-04 00:48 | 2014-09-12 03:33 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | low | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | Check if it's a beta version | ||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | Middle mouse button closes tab | ||||
Description: | Upon middle-mouse-clicking an open file tab, it would be nice if the tab executed the 'close tab/file' action, much like web browsers do for their open tabs. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
228 | [mSLDev] Syntax Checking | minor | have not tried | 2014-04-24 18:56 | 2014-09-12 01:22 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | checking for valid variables names in /var | ||||
Description: | Msldev incorrectly interpret the parameter using comma: Var %a test, test | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
232 | [mSLDev] Future Suggestions | minor | have not tried | 2014-06-06 21:46 | 2014-09-12 00:09 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | The find dialog (controk + f) needs an highlight button | ||||
Description: | When you type something first, msldev highlights all matching results, I'd like to get a button to get that feature, I'd reduce the size of the Find: editbox and put the highlight button at the end, near and aligned with "previous" and "next" | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
231 | [mSLDev] General (other) | minor | always | 2014-06-04 22:06 | 2014-09-11 23:37 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | v0.4.0.101 | ||||
Description: | There seems to be an issue with the find feature (CTRL+F). Whenever I attempt to find some text, the find usually gives me more than the total of actual results. Also, when the yellow highlights begin to show up, they often highlight matches that are not matches at all. | ||||
Steps To Reproduce: | Open a new file. Type in the code below EXACTLY: alias dobug if ($check) { highlights .this } alias donothing { noop } Now, press CTRL+F and type: chec You will notice that the yellow will highlight not only the chec in $check, but also the word 'this' and also 'g {' | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
msldev_find3.png (11,088) 2014-06-04 22:06 http://www.msldev.com/bugs/file_download.php?file_id=11&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
200 | [mSLDev] General (other) | feature | always | 2013-11-18 08:42 | 2014-09-11 02:17 |
|
|||||
Reporter: | Jordan | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Sync system | ||||
Description: | Per Gary in #mSL, the sync button should automatically save all files before syncing. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
223 | [mSLDev] General (other) | minor | always | 2014-04-06 00:27 | 2014-06-04 03:22 |
|
|||||
Reporter: | Panix | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Unable to change directory during installation | ||||
Description: | Hello. I just downloaded mSLDev for the first time. Wanted to try it out and see how it compares to using Notepad++ with some additions I found online to add support for mSL to it. When I go to install the program and click Next past the first window, it says it's gonna install to C and doesn't give me an option to change. I have a small SSD (40G) that Windows is installed on and I have a 2TB HDD I install everything else to. Granted, I doubt this program will take up much space so I could install this to C (haven't seen how much space it'll occupy) but I would like to change this over to a different drive. Am I missing something or is the default path hardcoded? | ||||
Steps To Reproduce: | Download 0.3.1.0 from website. Run Executable. Click Next View Install screen. | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
204 | [mSLDev] Syntax Checking | minor | N/A | 2013-12-17 03:24 | 2014-06-04 01:30 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | on *:serverdeop: (0.4.0.98) | ||||
Description: | Double check if this event exists. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
230 | [mSLDev] GUI Related | minor | have not tried | 2014-05-24 14:52 | 2014-05-25 18:53 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Using the drop down combo for quick references of aliases/events/menus | ||||
Description: | When you select an item that requires msldev to scroll to display that item, it won't scroll properly where the first line of the item is the last line visible, meaning you can't really see the code. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
201 | [mSLDev] Syntax Checking | minor | always | 2013-11-18 09:27 | 2014-05-25 05:40 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $& cause #group issues | ||||
Description: | using 0.4.0.98, paste the following in a remote file: #MST.core on alias test { /wiz is a bip $& see? } #MST.core end | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
226 | [mSLDev] Syntax Checking | minor | have not tried | 2014-04-19 22:55 | 2014-05-25 04:50 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | using 'del' key and { } syntax highlighting | ||||
Description: | If you delete characters near a valid {}, it won't color them | ||||
Steps To Reproduce: | alias test { }|t t | is the cursor position, hit del once and you get: alias test { }| t with uncolored { } | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
229 | [mSLDev] Future Suggestions | feature | N/A | 2014-04-25 23:47 | 2014-04-25 23:47 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Have option screen retain previous state | ||||
Description: | I would like it if the options screen remembered/retained how I left it. For instance, if I've expanded Code Editor & Appearance, then selected Colors and Fonts, I would like to be able to save my options, and if I re-open the editor, have it keep the same items expanded and selected. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
227 | [mSLDev] Future Suggestions | feature | N/A | 2014-04-23 16:51 | 2014-04-23 16:51 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | Add option to disable Calltip | ||||
Description: | It would be nice to have a feature in the options window to enable/disable the Calltip features. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
225 | [mSLDev] Syntax Highlighting | minor | have not tried | 2014-04-17 19:50 | 2014-04-17 19:50 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $submenu and alias name with : | ||||
Description: | In this case, msldev thinks the : is the seperator from the command part, throwing an error and coloring wrongly. | ||||
Steps To Reproduce: | menu @test { $submenu($tes:t($1)) } | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
224 | [mSLDev] GUI Related | minor | have not tried | 2014-04-14 11:35 | 2014-04-14 16:45 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | F3 to look for the next match works in others tabs | ||||
Description: | Currently, the control + f window is supposed to work per tab. Let's say you have two files opened, tab A and tab B Open the control + f window on tab A and then look for the term TERMA in that tab (and let's supposed you find it). Switch to tab B, hitting F3 to look forward for the next match will allow you to search for TERMA in tab B, that seems wrong considering it's supposed to work per tab, but I actually like the feature. So since it works, I think that whenever you switch to a tab that does not have a control + f window opened, if there is a last term searched, it should load the control+f window with the settings of the control + f window that was used for that last term, reflecting the fact we actually use it The other solution is to block the F3 shortcut to get it work per tab only but that means you have to reopen the window and possibly configure it etc, can be annoying sometimes. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
210 | [mSLDev] Syntax Checking | minor | always | 2014-01-06 04:49 | 2014-03-01 02:00 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Make msldev detect the TAB character before a command. | ||||
Description: | alias tabs { echo -ag This line is invalid. write tabs.txt this line is valid. } | ||||
Steps To Reproduce: | Use notepad for the TAB characters. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
78 | [mSLDev] General (other) | trivial | always | 2013-03-22 20:55 | 2014-03-01 01:45 |
|
|||||
Reporter: | hixxy | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | low | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | $& is not ignored in comments | ||||
Description: | $& should be ignored when it is in a comment, but it still indents the following line. | ||||
Steps To Reproduce: | Copy paste either of these into the IDE and then hit the "{ }" brackets button: Method 1: ; echo -a a $& b Method 2: /* echo -a a $& b */ | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
222 | [mSLDev] GUI Related | minor | have not tried | 2014-02-10 10:51 | 2014-02-10 10:51 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Calltips | ||||
Description: | I reported issues in the past regarding the calltips and how/when they are displayed, this one is different I think. When writting a simple loop going through a list of token with $gettok, the calltip for $gettok should disappear but does not. I don't use the () completion, nor the bracket completion. | ||||
Steps To Reproduce: | 0000001 - get an alias block: alias myalias { } 0000002 - type out, without copy pasting: var %a 1 while ($gettok(%listoftoken,%a,32)) { } In my situation, after adding the } of the loop, I still have the $gettok calltip, and more annoying than ever, because of it, I can't hit the up arrow and type "inc %a". We had an argument in the past where I think that the calltip should always disappear whenever the ')' of that identifier can be found so here when I type the 32)| ,| is the cursor, it should disappear. But even if you think it should disappear right now because we're next to the ), it at least should disappear when pressing the second ')' in 32))| or after pressing the space... of after pressing the {.. :) | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
221 | [mSLDev] GUI Related | minor | always | 2014-01-20 06:45 | 2014-01-20 06:45 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | mslDev's GUI is glitched | ||||
Description: | Recently, msldev.com was down and Zmodem asked for the latest msldev.exe (0.98), I copied mine from the folder and shared it with dropbox, so far so good. He then started to report the program was opened with a weird UI. The UI looks like this: https://dl.dropboxusercontent.com/u/4249275/weirdmsldev.png [^] Note that the program still works, the problems that come with that UI are irrelevant, I'm not going to list them nor the workarounds. For sure I told him the problem was on his end! Not really. I recently changed stuff on my comp, moved folder around, deleted old files etc.. Note: I'm on window 7 pro, and I think Zmodem is too I had the msldev.exe and others stuff (libs etc) in C:\users\wims\desktop\msldev\ and moved that to C:\msldev\ Today I went to run my msldev shortcut and windows correctly yielded 'can't find your program on c:\users\wims\desktop\msldev', would you like to look for it?' I clicked no, right clicked the shortcut > properties and changed the target to C:\msldev\mSLDev.exe and the 'Start in' option to C:\msldev\ (before it was the same, but with the appropriate folder C:\users\wims\desktop), saved and ran the shortcut, I got that UI problem. I tried to run the .exe directly, same problem. But unlike Zmodem I knew general.ini, which is stored in the Appdata was most likely the fucker here, and indeed, deleting that file made msldev runs with default settings, which means the UI was correct, putting back my old general.ini made the problem reappear. Furthermore, the General section of general.ini is the problem, my actual values (buggy) are: [General] initGeo=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\xff\xff\xff\xf8\xff\xff\xff\xe2\0\0\x1T\0\0\x1\x86\0\0\0\0\0\0\0\0\0\0\x1L\0\0\x1~\0\0\0\0\x2\0) initState=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\x2\0\0\0\0\0\0\0\xca\0\0\x3&\xfc\x2\0\0\0\x1\xfb\0\0\0\x10\0m\0I\0R\0\x43\0S\0y\0n\0\x63\0\0\0\0/\0\0\x3&\0\0\0o\0\xff\xff\xff\0\0\0\x3\0\0\x1M\0\0\0x\xfc\x1\0\0\0\x1\xfb\0\0\0\xe\0m\0s\0g\0\x41\0r\0\x65\0\x61\x1\0\0\0\0\0\0\x1M\0\0\0\x7f\0\xff\xff\xff\0\0\x1M\0\0\0\xbf\0\0\0\x4\0\0\0\x4\0\0\0\b\0\0\0\b\xfc\0\0\0\x2\0\0\0\x2\0\0\0\x1\0\0\0\x18\0\x63\0o\0l\0o\0r\0T\0o\0o\0l\0\x62\0\x61\0r\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\x1\0\0\0\x16\0m\0\x61\0i\0n\0T\0o\0o\0l\0\x62\0\x61\0r\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0) If I edit either the initGeo name to initGeotest, or initState to initStattest (but no both at the same time) the UI is correct. I don't know what's causing this but I hope you have enough clues here | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
120 | [mSLDev] Future Suggestions | minor | N/A | 2013-04-04 19:33 | 2014-01-10 15:28 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | displaying the number of informations/errors/warnings of files inside the sync bar | ||||
Description: | msldev could run in a thread something that parses all the files of the sync bar and check for errors/warnings/informations and display them next to the file name with icon. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
208 | [mSLDev] Future Suggestions | feature | N/A | 2014-01-04 00:32 | 2014-01-04 00:32 |
|
|||||
Reporter: | Zmodem | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | low | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | Check if it's a beta version | ||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | Creating New Hash Tables | ||||
Description: | The ability to create a new hash table, with new name/keys/values, would be nice. Not that creating/editing these types of items is necessary within mSLDev, nor is it trivial in mIRC to do it yourself, but it would be a nice feature to have. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
207 | [mSLDev] Syntax Checking | minor | have not tried | 2013-12-25 14:45 | 2013-12-25 14:45 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | illegal math operation in $calc() with eval brackets (0.4.0.98) | ||||
Description: | $+ inside eval brackets gives an illegal math operation warning | ||||
Steps To Reproduce: | alias foo noop $calc(%var. [ $+ [ %var2 ] ]) | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
206 | [mSLDev] AutoComplete | minor | have not tried | 2013-12-17 20:25 | 2013-12-17 20:25 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | /var assignement | ||||
Description: | var %1- $1-,%ww,|, | is the cursor, hit '%', msldev doesn't display the list of variable for autocompletion | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
205 | [mSLDev] Syntax Checking | minor | have not tried | 2013-12-17 07:04 | 2013-12-17 07:04 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Errors/informations with event definitions | ||||
Description: | With the following code: on *:text:{ } msldev reports an error: "on text matchtext parameter is missing" which is correct: It also reports an information: "On Event missing actual commands." While that might be correct, since { } can be considered as empty, if the event is actually: on *:text:*:#:{ } msldev does not report that information (and no error), so there it doesn't consider { } as empty (which is prefered imo). | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
129 | [mSLDev] Syntax Highlighting | major | sometimes | 2013-04-09 17:49 | 2013-11-23 23:33 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | assigned | Product Version: | |||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Highlighting a variable in the same scope with $& | ||||
Description: | Sometimes the count to highlight all variables of the same name in the same scope is wrong, probably because of $&, resulting in weird part of the text being highlighted, see the steps. | ||||
Steps To Reproduce: | alias -l mario_displayobject { ;xcc ycc y dir x1 state inair jump down autod speed head if ($1 == mario) { tokenize 32 $hget(mario_object,mario) var %decal,%xc,%yc,%wc,%hc,%dx,%dy if ($hget(mario,grandi)) { if ($int($calc(($ticks - $hget(mario,t0grandi)) / 150)) & 1) { %xc = 27 * 20 %yc = 17 %wc = 27 %hc = 28 if ($6 == petit) %decal = 1 } if ($calc($ticks - $hget(mario,t0grandi)) >= 1600) hdel mario grandi } ;sprite if (!%xc) { if (!$5) hadd mario mul 0 elseif ($calc($ticks - $hget(mario,t0walk)) >= $iif($istok(4 -4,$5,32),120,150)) { if ($hget(mario,mul) >= $iif($6 == grand,2,1)) hadd mario mul $calc($v2 - 1) else hinc mario mul hadd mario t0walk $ticks } var %xc = $iif($7 || $8,$iif($9 || $10,$calc(4*27),$iif($6 == grand,$calc(27*3),$calc(26*4))),$iif($9 || $10,$calc(27*4),$calc($iif($6 == grand,27,26) * $hget(mario,mul)))) %yc = $iif($6 == grand,17,0) %wc = $iif($6 == grand,27,26) %hc = $iif($6 == grand,28,17) } if ($4 == d) { if ($6 == petit) %dx = 26 - $iif(%xc == 0,11,$iif(%xc == 26,11,$iif(%xc == 104,11,$iif(%xc == 540,11)))) else %dx = 27 - $iif(%xc == 0,12,$iif(%xc == 27,12,$iif(%xc == 54,12,$iif(%xc == 81,12,$iif(%xc == 108,12,$iif(%xc == 540,12)))))) } %dy = $iif($6 == petit,-1,+4) drawcopy -tn @marioo.b 16711935 %xc %yc %wc %hc @marioo $& $calc($1 + %dx) $& $calc($2 * 8 %dy - $3 $iif(%decal,-11) $iif($9 && $12 == 1,-2)) $iif($4 == d,-) $+ %wc %hc ;debug dots var %a 1 while ($var(%xd*,%a).value) { $v1 | inc %a } } } load this in a new file and highlight %dy on line 34, it shouldn't work correctly, it's hard to describe because when i first noticed it, i created a new file and copied exactly what i had, but couldn't reproduce the issue in this new file, i still managed to figure out that the problem seems to be related to the $& but, when i first noticed the problem, it was with %a at the end, after editing the original code, i managed to fix the problem for %a, but then %dy followed, and i could reproduce it on a new file. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
203 | [mSLDev] Syntax Highlighting | minor | have not tried | 2013-11-23 22:30 | 2013-11-23 22:30 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | editing alias file with /* */ comment, using $& | ||||
Description: | Cba to investigate this one, here is a screenshot: https://dl.dropboxusercontent.com/u/4249275/syntaxhlbug%40msldev.png [^] The code used in the screenshot can be found here http://forum.swiftirc.net/viewtopic.php?f=74&t=24161 [^] Note that I tried to copy paste part of the code including the /* */ in a remote file, it worked, but it also worked on the alias file (overwritting what i just copied actually), so it looks like it's a problem when we edit the code manually. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
202 | [mSLDev] General (other) | minor | have not tried | 2013-11-23 22:11 | 2013-11-23 22:11 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Control + s to save an alias file | ||||
Description: | It doesn't work, but File > save works. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
197 | [mSLDev] General (other) | minor | always | 2013-11-15 22:41 | 2013-11-16 17:03 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Clicking OK from the options dialog marks all open script files as unsaved* | ||||
Description: | ^ | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
161 | [mSLDev] Future Suggestions | feature | have not tried | 2013-06-07 08:52 | 2013-11-16 14:37 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Refresh button in hash table viewer tool | ||||
Description: | It would be nice if there were a button in the hash table viewer to refresh the table currently being viewed. Currently, clicking on a key or value seems to update the values but the viewer doesn't update with new keys that have been added. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
199 | [mSLDev] Future Suggestions | minor | have not tried | 2013-11-15 22:57 | 2013-11-15 22:57 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Rename files | ||||
Description: | It would be nice to be able to rename files from mSLDev. Preferably with File > rename and with a context menu option in the sync bar. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
104 | [mSLDev] Future Suggestions | feature | always | 2013-03-27 13:07 | 2013-11-15 03:35 |
|
|||||
Reporter: | westor | Platform: | Win7 32-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | high | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | History of files opened! | ||||
Description: | Add an files history in "File" menu to access faster and not try to open them again. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
193 | [mSLDev] Future Suggestions | feature | N/A | 2013-11-04 23:45 | 2013-11-15 03:05 |
|
|||||
Reporter: | spling | Platform: | Win8 64-bit | ||
Assigned To: | administrator | OS: | Windows 8 | ||
Priority: | normal | OS Version: | (6.2) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Remember the files I had open. | ||||
Description: | I suggest that mSLDev remembers the files I had open and my cursor positions therein when I exit the program, and restores these upon reopening the program. I enjoy this feature in other programs and think it would make an excellent addition to mSLDev. | ||||
Steps To Reproduce: | |||||
Additional Information: | Just a suggestion. No problems here. I imagine that if this functionality is added to mSLDev, others will certainly want the ability to toggle it off. Keep up the good work. | ||||
System Description | This profile is for problems on the 64-bit version of Microsoft Windows 8. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
191 | [mSLDev] Future Suggestions | feature | N/A | 2013-11-04 17:43 | 2013-11-10 04:06 |
|
|||||
Reporter: | spling | Platform: | Win8 64-bit | ||
Assigned To: | administrator | OS: | Windows 8 | ||
Priority: | none | OS Version: | (6.2) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.32 | ||||
|
|||||
Summary: | Include Titlebar text in sync bar items | ||||
Description: | Currently when I have multiple mIRC clients running, the sync bar just shows them as "mIRC" and "mIRC". It would be helpful if this would also show the contents of the titlebar, so that I could see more easily which mIRC client is which. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on the 64-bit version of Microsoft Windows 8. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
175 | [mSLDev] Future Suggestions | minor | have not tried | 2013-07-04 19:30 | 2013-11-09 22:18 |
|
|||||
Reporter: | Daniel | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | "save as" option | ||||
Description: | Under file, make an option to save the file under another name and in another directory. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
102 | [mSLDev] Syntax Checking | minor | always | 2013-03-27 00:29 | 2013-11-09 21:16 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 64-bit | ||
Assigned To: | administrator | OS: | Windows XP | ||
Priority: | normal | OS Version: | (5.1) | ||
Status: | resolved | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Regex bug. False positive. | ||||
Description: | msldev thinks a "/" in the code below is wrong. | ||||
Steps To Reproduce: | alias regex_bug { ; code from Wims pacman game. msldev thinks the last "/" is wrong. hdel $iif($regex(a,$hget(pacserv,nicks),/([@~]) $+ $1(?: |$)/),pacservp,pacservs) %v } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
194 | [mSLDev] Future Suggestions | minor | always | 2013-11-06 05:55 | 2013-11-09 15:47 |
|
|||||
Reporter: | Wims | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Autocompletion of the } when pressing enter | ||||
Description: | I know this is supposed to be an old feature, but somehow (ok not somehow, most likely because of all the previous bugs!!) it would never work/happen here. Since 0.4.0.97, it's 'working' but I don't like it, I can't find an option to disable it, I would like to see an option to disable it. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
196 | [mSLDev] GUI Related | minor | have not tried | 2013-11-07 10:29 | 2013-11-09 15:10 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Pinning the debug pane in the same area as the sync window | ||||
Description: | Tested on 0.4.0.97, if you do that you cannot get it back using the menubar, you'll have to disable the sync area first. | ||||
Steps To Reproduce: | https://dl.dropboxusercontent.com/u/4249275/mario/msldev_bug.wmv [^] | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
138 | [mSLDev] Syntax Checking | minor | have not tried | 2013-04-15 16:54 | 2013-11-06 13:55 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | groups | ||||
Description: | mslDev report that 'end' is an invalid parameter for the #group directive, which is totally wrong. #group on/off ..code.. #group end This is the syntax, 'on' and 'off' are only meant to be used first, and 'end' ends it. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
89 | [mSLDev] Future Suggestions | feature | N/A | 2013-03-24 04:17 | 2013-11-06 13:49 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | low | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | Differentiate between local and global variables with different highlighting | ||||
Description: | As it sounds. Just a feature suggestion. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
67 | [mSLDev] General (other) | minor | have not tried | 2012-12-25 06:04 | 2013-11-06 13:36 |
|
|||||
Reporter: | Terror_nisse | Platform: | WinXP 32-bit | ||
Assigned To: | OS: | Windows XP | |||
Priority: | normal | OS Version: | (5.1) | ||
Status: | new | Product Version: | 0.2.1.3 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Closing bracket | ||||
Description: | C:/Program Files/ZigWap/mSLDev/Untitled1 5:13 condition Invalid closing brace, no opening brace found | ||||
Steps To Reproduce: | add this: alias colorize { var %i -1,%s 0,%o,%e $(%o = $+(,$calc(%s % 14+2),$v1,,%o),) while $mid($1-,%i,1) > { dec %i if $v1 = ) { $(,%e) inc %s } elseif $v1 = ( { dec %s $(,%e) } else %o = $v1 $+ %o } echo %o } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
192 | [mSLDev] Future Suggestions | feature | always | 2013-11-04 22:28 | 2013-11-04 22:28 |
|
|||||
Reporter: | spling | Platform: | |||
Assigned To: | OS: | ||||
Priority: | immediate | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Add "Load Script" and "New Script" to right click context menu of Remote Script folder in sync bar | ||||
Description: | 11-4 21:21:58 <spling> I was spending so much time trying to figure out how to make a new script in my client with msldev popping up like that 11-4 21:22:35 <Wiz126> Need a 'add to mIRC' button. 11-4 21:22:43 <spling> that was my next sentence 11-4 21:22:51 <Wiz126> Well, were is it? 11-4 21:22:56 <Wiz126> s/were/where/ 11-4 21:23:24 <spling> I was expecting a "New Script.." when I right clicked on the "Remote Scripts" folder 11-4 21:23:57 <Wiz126> Right clicking should also have 'load script'. 11-4 21:24:09 <spling> good idea! 11-4 21:24:42 <Wiz126> So long no one posts it, I won't need to actually implement it. | ||||
Steps To Reproduce: | |||||
Additional Information: | Your move, Admin. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
162 | [mSLDev] Syntax Highlighting | minor | always | 2013-06-10 18:52 | 2013-11-02 00:44 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | control + h around } breaks the coloring of the pair of { } | ||||
Description: | alias hi { |} alias t { } hit control + h there (| is the cursor) | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
189 | [mSLDev] AutoComplete | minor | have not tried | 2013-10-31 23:15 | 2013-11-02 00:41 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | closing } added after clicking to move the cursor (0.4.0.95) | ||||
Description: | After typing an opening '{' bracket and then *clicking* to move the cursor somewhere else, a closing '}' bracket is still inserted when next pressing enter. using arrow keys to move the cursor is fine and cancels the closing bracket being added with the next press of enter. also: using the enter key on the numpad does not insert a closing bracket; i'm unsure if this is intentional. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
170 | [mSLDev] Syntax Highlighting | minor | have not tried | 2013-06-15 01:58 | 2013-11-02 00:33 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | alias file edit tool incorrect matching bracket highlight 0.4.0.94 | ||||
Description: | When placing the cursor to an opening or closing {bracket}, the wrong one is highlighted as the match. Clicking next to either of the closing brackets actually highlights the same opening bracket, one of which happens to be the correct match. The "construct, control" option's matching close bracket is also wrong for the syntax highlighting. | ||||
Steps To Reproduce: | /F5 { window -g0 "status window" | var %c 1 | while $chan(%c) { window -g0 $v1 | inc %c } } ;If the code is expanded out and the pipes removed, the bracket match (with the cursor next to the bracket) is correct but the "construct, control" match highlight is still wrong (because the close bracket isn't highlighted at all). | ||||
Additional Information: | /* A slightly different (actually contains a mistake) example with the same behavior */ if ($foo) { noop } } ;The second closing bracket is highlighted as the "construct, control" match, which is wrong. Multi-line code, however, doesn't appear to highlight the closing bracket at all for this. ;Placing the cursor next to the opening bracket correctly highlights the first closing bracket as the match. ;Placing the cursor next to the first closing bracket correctly identifies the match. ;Placing the cursor next to the second closing bracket also identifies it as the match for the opening bracket. Since equivalent multi-line code doesn't do this, I'm assuming it's wrong here. | ||||
Attached Files: |
ss (2013-06-15 at 04.24.34).png (3,661) 2013-06-15 01:58 http://www.msldev.com/bugs/file_download.php?file_id=10&type=bug |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
176 | [mSLDev] Future Suggestions | minor | have not tried | 2013-07-04 19:38 | 2013-11-01 12:11 |
|
|||||
Reporter: | Daniel | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Rename 'Message area' to debug area/window or developer area/window | ||||
Description: | I think that makes more clear what it actually is about. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
174 | [mSLDev] AutoComplete | minor | have not tried | 2013-06-29 14:23 | 2013-11-01 02:48 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Autocompletion for variables is not working in several places | ||||
Description: | | is always the cursor. 1) /if, /elseif, /while statement (hit the '%' character): if ( | ) { } 2) /var (hit the '%' character) var | | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
190 | [mSLDev] AutoComplete | minor | always | 2013-11-01 00:08 | 2013-11-01 01:45 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | pressing right arrow jumps an extra character (when leaving a calltip?) (0.4.0.95) | ||||
Description: | Pressing the right arrow key jumps two characters instead of one in some situations. | ||||
Steps To Reproduce: | ;Start with this: alias foo if () noop ;move the cursor inside the conditional and type an identifier which has a calltip, such as $dialog() ;cursor should be inside $dialog(|) with a calltip open ;press the right arrow key once and the cursor jumps two characters and closes the calltip. pipe shows new cursor position: alias foo if ($dialog())| noop | ||||
Additional Information: | ;it doesn't seem to matter what the characters are, the cursor just jumps two of them. ;leftmose pipe shows beginning position (with calltip still open) and rightmost pipe shows end position: alias foo if ($dialog(|) |) noop ;in this case the second jumped character was a space ;same thing here; again leftmost = start, right = end (and with calltip open for $calc alias foo noop $calc(|) |foo | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
182 | [mSLDev] AutoComplete | minor | always | 2013-08-12 06:00 | 2013-11-01 01:39 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Additional dot added to identifier when typing a dot and pressing enter to select identifier from list (0.4.0.95) | ||||
Description: | alias foo.bar return alias foo noop $foo.| ;pipe is cursor position. Press enter to select $foo.bar and you should see '$foo..bar' inserted. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
187 | [mSLDev] AutoComplete | minor | always | 2013-10-31 22:48 | 2013-11-01 01:03 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | high | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | property completion bugs (0.4.0.95) | ||||
Description: | typing part of a property and hitting enter will insert the full property appended to the letters already typed using arrow keys to move the cursor will not close the property selection dropdown. neither does typing past the end of the property so that there are no more matches or hitting space | ||||
Steps To Reproduce: | alias foo noop $nick(#,1).co| ;press enter at the pipe to select 'colors', you should see 'cocolors' ;the property selection menu also doesn't close unless you click away, press ESC, or select a property from the list. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
164 | [mSLDev] Future Suggestions | minor | have not tried | 2013-06-14 01:39 | 2013-11-01 00:47 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | The drop down combo which reference the different alias/event/etc | ||||
Description: | 1) When you open a file, even a small one, there is a big delay before the combo is filled accordingly (10 secs?). Could that delay be either reduced to 3-5 secs or simply as fast as possible? 2) The width of that combo is a bit big/ridiculous, it's sure possible that a line fill it entirely, but that's pretty uncommon (perhaps it's possible to add an horizontal scrollbar anyway?), perhaps the width could be reduced in order for an editbox to be there, to search for an alias/event/etc | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
163 | [mSLDev] GUI Related | minor | have not tried | 2013-06-12 10:31 | 2013-11-01 00:47 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | adding new line at the end doesn't scroll the window | ||||
Description: | Let's say this is the end of the file (from an alias, for example): 391| cmd 392| cmd 393| cmd 394|}• ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ • is the cursor, if you hit enter there, new line is added, but you cannot see it, you need to scroll manually | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
179 | [mSLDev] Syntax Checking | minor | have not tried | 2013-07-21 07:00 | 2013-11-01 00:36 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Ident: $line: Too many parameters. (0.4.0.94) | ||||
Description: | $line(@win, 0, 1) says there are too many parameters in the error list. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
180 | [mSLDev] AutoComplete | minor | always | 2013-08-10 02:48 | 2013-11-01 00:36 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Strange variable name complete behavior with adjacent code blocks (0.4.0.94) | ||||
Description: | Variable names from separate blocks are listed for completion in single-line blocks (from the blocks directly below them). | ||||
Steps To Reproduce: | alias foo noop %v| | ;left pipe is cursor. %variable_name appears in the complete options alias foobar noop %variable_name alias foo noop %v| | ;left pipe is cursor. %variable_name appears in the complete options alias foobar { noop %variable_name } | ||||
Additional Information: | Applies to other types of code blocks, not just aliases. (Tested with two on text events) Placing an empty line between the two blocks stops the behavior. Making the top block multi-line stops the behavior. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
185 | [mSLDev] General (other) | minor | have not tried | 2013-10-15 12:29 | 2013-11-01 00:35 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Control + q to exit the program | ||||
Description: | Well, I'm really not a fan of the shortcut, I use control + s a lot to save the changes, and I always end up closing the program, now that's my fault but when hitting control + q with unsaved changes, mslDev should ask me if I want to save. Instead, it closes without saving. Alternatively, could the shortcut be optional, or can we change the shortcut? | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
184 | [mSLDev] General (other) | minor | have not tried | 2013-09-29 17:41 | 2013-11-01 00:35 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Crash inside on keydown | ||||
Description: | When editing an on keydown event declaration, specifically the $keyval values accepted, msldev crashes easily when entering a non digit character. | ||||
Steps To Reproduce: | 1. Control + n > script file 2. paste and put your cursor according to the '|': on *:keydown:@a:1,2,3,4|:{ } 3. add a comma, and then add a 'z', which would result in this if msldev wasn't crashing: on *:keydown:@a:1,2,3,4,z|:{ } | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
183 | [mSLDev] Syntax Checking | minor | always | 2013-09-15 20:25 | 2013-11-01 00:35 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | { recognized as a command and indenting is wrong | ||||
Description: | using 0.95 . paste in a new script file and hit control + h | ||||
Steps To Reproduce: | alias test { echo -a ok if () { { } } alias working { } | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
186 | [mSLDev] Syntax Highlighting | minor | always | 2013-10-22 02:49 | 2013-10-22 02:49 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | /var not coloring identifier | ||||
Description: | $calc(1) is not colored there, is it normal? | ||||
Steps To Reproduce: | alias test { var %test $!eval( $+ test $+ , $calc(1) ) } | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
152 | [mSLDev] AutoComplete | minor | always | 2013-05-01 14:08 | 2013-09-16 17:24 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | assigned | Product Version: | |||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | calltip is displayed when it shouldn't | ||||
Description: | i had this line: var %b1 $gettok($v1,1,32),%b2 $gettok($v1,2,32),%cb |%vb $gettok($6,$ceil($calc(%b / 2)),32) | is the cursor. then i pasted this: $ceil($calc(%b / 2)) resulting in: var %b1 $gettok($v1,1,32),%b2 $gettok($v1,2,32),%cb $ceil($calc(%b / 2))|%vb $gettok($6,$ceil($calc(%b / 2)),32) then, i put a comma: var %b1 $gettok($v1,1,32),%b2 $gettok($v1,2,32),%cb $ceil($calc(%b / 2)),|%vb $gettok($6,$ceil($calc(%b / 2)),32) there, msldev displayed the calltip of the $ceil function. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
171 | [mSLDev] Future Suggestions | feature | N/A | 2013-06-25 18:26 | 2013-08-07 22:10 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Script compile function | ||||
Description: | I've started using a global aliases file that all of my running mIRCs share. It contains common general purpose aliases that I may use in any number of scripts. Using this library-type file simplifies many things, but presents a couple of new problems. 1) Aliases don't show up in the auto-complete lists outside of their own file (This is an mSLDev-specific issue, and I know you're aware of it). 2) I have to go through the alias library to piece together scripts before posting them online or giving them to people. The second problem wouldn't be so bad if piecing the script together only needed to be done once per file. However, I often find myself making changes to functions and needing to repeat the process. It would be awesome if mSLDev could compile these aliases together from other files. Basically, compiling from one script that has any alias references from another file will output a new file with the primary script and the referenced aliases appended to the bottom. Yes I realize it's not a simple suggestion. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
177 | [mSLDev] General (other) | minor | have not tried | 2013-07-11 10:13 | 2013-07-11 10:16 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | replacing text matched from regular expression | ||||
Description: | That situation is simply not working, I used /%v(?=,| )/ to match %v variables in a scope, I want to replace them with %id, but when I click replace, mslDev just goes on with the next match, without replacing. | ||||
Steps To Reproduce: | alias test { var %v "" if (%v == "") sure } 1) hit control + f 2) select the regular expression feature 3) enter the above regular expression in the search field 4) enter %id in the replace field 5) click 'next' and/or 'replace' | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
144 | [mSLDev] Future Suggestions | minor | N/A | 2013-04-16 10:52 | 2013-06-29 10:33 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Another check for an usual error | ||||
Description: | It's something that happen often I think, sometimes you edit some if/else statements and you end up with the first part being an esleif directly, mIRC silently ignores that, but it would be great if msldev could warn us | ||||
Steps To Reproduce: | alias msl { elseif (dev) { } } or alias msl { else { yeah i'm quite blind } } | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
169 | [mSLDev] General (other) | minor | always | 2013-06-14 22:45 | 2013-06-22 19:09 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | menu prefix warning for empty items | ||||
Description: | Warnings state "The menu item specified will never be displayed without any code." when it's not always true. | ||||
Steps To Reproduce: | menu nicklist { Twitch: .Op: .msg # .mod $1 } ;Erroneous warning is shown. | ||||
Additional Information: | Adding a space after "Twitch:" causes the warning to go away when it should still be there with no nested items. E.G. menu nicklist { Twitch: } ^has a space after Twitch: but shows no warning. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
134 | [mSLDev] GUI Related | minor | have not tried | 2013-04-15 12:48 | 2013-05-17 07:59 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | feedback | Product Version: | |||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Highlighting %variable | ||||
Description: | Create a new file, paste: alias -l pacserv_collision { var %a 1 while ($gettok($1,$+(%a,-,$calc(1+%a)),32)) { var %b 1,%a1 $gettok($v1,1,32),%a2 $gettok($v1,2,32) while ($gettok($2,$+(%b,-,$calc(1+%b)),32)) { var %b1 $gettok($v1,1,32),%b2 $gettok($v1,2,32),%vb $gettok($6,$ceil($calc(%b / 2)),32) if ($onpoly(4,4,$calc(3+%a1),$calc(3+%a2),$calc(-3+$3 +%a1),$calc(3+%a2),$calc(-3+$3 +%a1),$calc(-3+$4 +%a2),$calc(3+%a1),$calc(-3+$4 +%a2), $& %b1,%b2,$calc(%b1 + $3),%b2,$calc(%b1 + $3),$calc(%b2 + $4),%b1,$calc(%b2 + $4))) { if ($gettok($hget(pacservi,%vb),5,32)) { hadd pacservi %vb $calc($gettok($hget(pacservg,%vb),1,32) * $3) $calc($gettok($hget(pacservg,%vb),2,32) * $4) 0 0 0 0 $gettok($hget(pacservi,%vb),7,32) } else { if ($hget(pacserv,lives) > 1) { hadd pacservi $gettok($5,$ceil($calc(%a / 2)),32) $calc($gettok($hget(pacservg,pacman),1,32) * $3) $calc($gettok($hget(pacservg,pacman),2,32) * $4) 0 0 0 0 $gettok($hget(pacservi,$gettok($5,$ceil($calc(%a / 2)),32)),7,32) hadd pacservi %vb $calc($gettok($hget(pacservg,%vb),1,32) * $3) $calc($gettok($hget(pacservg,%vb),2,32) * $4) 0 0 0 0 $gettok($hget(pacservi,%vb),7,32) hdec pacserv lives swriting lives $hget(pacserv,lives) } else { hadd pacserv dead $hget(pacserv,dead) $gettok($5,$ceil($calc(%a / 2)),32) hdel pacservi $gettok($5,$ceil($calc(%a / 2)),32) swriting dead $gettok($5,$ceil($calc(%a / 2)),32) if (!$hfind(pacservi,pacman*,0,w)) hadd pacserv paclose 1 } } if ($hget(pacserv,as_ $+ %vb)) && ($gettok($v1,1,32)) { hadd pacserv as_ $+ %vb $v1 1 | astar_go $v1 %vb } } inc %b 2 } inc %a 2 } } | ||||
Steps To Reproduce: | put your cursor around %vb on the line: hadd pacservi %vb $calc($gettok($hget(pacservg,%vb),1,32) * $3) $calc($gettok($hget(pacservg,%vb),2,32) * $4) 0 0 0 0 %vb variables on that same line are not highlighted. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
156 | [mSLDev] GUI Related | minor | always | 2013-05-13 03:55 | 2013-05-13 19:52 |
|
|||||
Reporter: | user36 | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Other topics in the INI file appear while editting a script | ||||
Description: | items that arent under the [script] topic appear in the editor. | ||||
Steps To Reproduce: | 1) Add another topic to the ini file [topic] text=text 2) Open in mSLDev "text" will appear above or below the script depending on its position in the INI file relative to [script] | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
148 | [mSLDev] Future Suggestions | minor | have not tried | 2013-04-18 16:38 | 2013-04-18 16:38 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Shift + open | ||||
Description: | Would be cool if opening a file from the syncbar while holding shift would open that file completely folded, not sure if you can do that for the menu File > open but might be a good idea too :) | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
133 | [mSLDev] Future Suggestions | minor | have not tried | 2013-04-15 11:57 | 2013-04-15 11:57 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Control + space brings up the autocompletion's list of suggestions (if context allow it) | ||||
Description: | self explanatory, the key combination control+space can be something else of course. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
114 | [mSLDev] GUI Related | minor | always | 2013-04-02 18:40 | 2013-04-13 09:37 |
|
|||||
Reporter: | Travis | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | feedback | Product Version: | |||
Product Build: | Resolution: | reopened | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.4.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Sync bar narrows itself (4.0.41) | ||||
Description: | The sync bar narrows itself as mSLDev's window is made smaller and keeps the same smaller size when the program is re-expanded. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
103 | [mSLDev] General (other) | major | always | 2013-03-27 12:51 | 2013-04-05 20:32 |
|
|||||
Reporter: | westor | Platform: | Win7 64-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | immediate | OS Version: | (6.1) | ||
Status: | new | Product Version: | 0.3.1.0 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | Change language not working | ||||
Description: | When i try to change the language and select one from the list and says me to restart the program after restart the language does not changing! | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
122 | [mSLDev] GUI Related | major | always | 2013-04-04 22:07 | 2013-04-04 22:07 |
|
|||||
Reporter: | Wims | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Folding issues | ||||
Description: | Editing a folded body is buggy, we talked about it. I would expect it to work like visual sutdio i guess: -a single click between the two { } should select everything between the two { } including them, and from there, it should act like a selected text, where what is selected is the whole content including the { }. -we should be able to put the cursor after the }, hitting 'backspace' here would delete the whole content inside the { } including the { }. -we should be able to put the cursor before the {, hitting 'delete' here would also delete the whole content.. -double clicking inside the { } should unfold the content. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
88 | [mSLDev] GUI Related | feature | N/A | 2013-03-24 04:10 | 2013-03-27 22:04 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | Back and forward buttons that go to the previous cursor location in a file | ||||
Description: | As it sounds, back and forward buttons that navigate to your previous position in a script file. Especially useful when moving around a file via Find or clicking an item in the Error List, but would also be helpful moving back and forth between functions. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
85 | [mSLDev] Future Suggestions | feature | N/A | 2013-03-24 03:33 | 2013-03-27 20:15 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | none | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | 'new script file' option in right click menu (sync area) | ||||
Description: | When right clicking an mIRC in the Sync bar it would be handy to have a shortcut that created a new .mRC file in that program's $scriptdir and loaded the file into the last position. This is the best place I can think of to put such a shortcut because it's easily accessible and tied to a specific mIRC (unlike creating a new file using Choose a Tool which is not tied to a specific mIRC). | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
92 | [mSLDev] Future Suggestions | minor | N/A | 2013-03-24 05:02 | 2013-03-27 18:19 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | make file -> open remember and default to the last used directory | ||||
Description: | If I use ctrl+(shift|alt)+o I'd like the dialog to remember and default to the last location I used it to open a file from. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
45 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-30 16:36 | 2013-03-27 12:58 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 32-bit | ||
Assigned To: | OS: | Windows XP | |||
Priority: | normal | OS Version: | (5.1) | ||
Status: | new | Product Version: | 0.1.1.24 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Shell Integration | ||||
Description: | Programs like 7zip/WinRAR/Notepad++ and others have the option for shell integration, to right click a file, and open with, or just click the specific file, and it opens. Possibly make mSLDev open *.mrc file by default? Also have option to Enable/Disable shell integration from inside the program. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
86 | [mSLDev] Future Suggestions | feature | N/A | 2013-03-24 03:42 | 2013-03-24 03:42 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | low | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | 7.29 | ||||
|
|||||
Summary: | Drag files in the Sync bar to change the loaded order in mIRC | ||||
Description: | The summary should be explanatory. It would be handy on rare occasions. | ||||
Steps To Reproduce: | |||||
Additional Information: | Not the most useful feature but it doesn't hurt to toss the idea in. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
65 | [mSLDev] Future Suggestions | feature | have not tried | 2012-12-24 19:33 | 2012-12-24 19:33 |
|
|||||
Reporter: | Travis | Platform: | |||
Assigned To: | OS: | ||||
Priority: | low | OS Version: | |||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | auto save previous versions | ||||
Description: | periodically save the code being worked on, and also back up each script file as it's loaded into mSLdev | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
63 | [mSLDev] Future Suggestions | feature | have not tried | 2012-12-21 02:07 | 2012-12-21 02:07 |
|
|||||
Reporter: | Jordan | Platform: | Win7 32-bit | ||
Assigned To: | OS: | Windows 7 | |||
Priority: | normal | OS Version: | (6.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | SVN and similar | ||||
Description: | Should allow for SVN support as an option. Also other version control systems! | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
60 | [mSLDev] Syntax Checking | feature | always | 2012-05-05 08:28 | 2012-05-05 08:28 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 32-bit | ||
Assigned To: | OS: | Windows XP | |||
Priority: | normal | OS Version: | (5.1) | ||
Status: | new | Product Version: | 0.2.1.7 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Unused/Dead code detection. | ||||
Description: | Would be nice for mSLDev to detect unused code. The variable %x in the example below is unused. | ||||
Steps To Reproduce: | on *:text:*:#:{ ; Unused variable var %x $chr(32) ; Insert generic script code... echo -ag $timestamp $nick $chan $1- } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
56 | [mSLDev] Syntax Checking | feature | always | 2012-04-23 13:44 | 2012-04-25 16:40 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 32-bit | ||
Assigned To: | administrator | OS: | Windows XP | ||
Priority: | normal | OS Version: | (5.1) | ||
Status: | acknowledged | Product Version: | 0.2.1.7 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Disable Real Time Syntax Checking. | ||||
Description: | Lets have an option to easily enable/disable the real time syntax checking. Reason behind this is that someone might not like it and only want to run it after finishing a script. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
47 | [mSLDev] Future Suggestions | minor | have not tried | 2011-08-11 02:46 | 2012-04-18 21:26 |
|
|||||
Reporter: | FelicianoX | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Hide comments | ||||
Description: | Just like there's a Fold all blocks option, there should be a hide/fold/w.e all comments :) | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
52 | [mSLDev] Future Suggestions | minor | N/A | 2011-09-25 01:38 | 2011-09-25 01:38 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 32-bit | ||
Assigned To: | OS: | Windows XP | |||
Priority: | normal | OS Version: | (5.1) | ||
Status: | new | Product Version: | |||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Detect scripts that override default mIRC commands. | ||||
Description: | Some of mIRC's default command can be overridden with alias, would be nice to have the option to check. | ||||
Steps To Reproduce: | alias notice .notice $1- | echo 4 -eat -> $+(-, $1, -) $2- | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
46 | [mSLDev] Future Suggestions | minor | have not tried | 2011-08-07 21:11 | 2011-08-23 17:50 |
|
|||||
Reporter: | FelicianoX | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.2.1.3 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Shrink/Expand All | ||||
Description: | A button/shortcut to expand/shrink all events. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
31 | [mSLDev] Syntax Checking | minor | always | 2011-07-23 18:31 | 2011-08-05 00:11 |
|
|||||
Reporter: | MaSOuD | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.2.1.1 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $didtok() syntax checking error | ||||
Description: | no description specified. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
42 | [mSLDev] Syntax Highlighting | minor | always | 2011-07-28 15:40 | 2011-07-29 21:00 |
|
|||||
Reporter: | KindOne | Platform: | WinXP 32-bit | ||
Assigned To: | administrator | OS: | Windows XP | ||
Priority: | normal | OS Version: | (5.1) | ||
Status: | resolved | Product Version: | 0.1.1.19 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.24 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Select Code, try to make bold, code overwritten. | ||||
Description: | mIRC's normal action for making text bold (CTRL+B) for example, is highlight the line, and press CTRL+B, the text then gets the "" at the beginning and end. In mSLDev, this is not true. | ||||
Steps To Reproduce: | this-is-an-example Select the above code. Press CRTL+B (or any other combinations) The highlighted code is then replaced with the square for that corresponding key combination () | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows Vista on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
9 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-07 18:29 | 2011-07-29 21:00 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.24 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Right click Tabs. | ||||
Description: | Programs like Notepad++ and Firefox have the option to right click tabs, with the ability to "Close Other Tabs". If I have 10 scripts opened, and want to close out of them all, but "foo.mrc", then I right click the tab "foo.mrc" and click "Close Other Tabs". | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
43 | [mSLDev] Syntax Highlighting | trivial | always | 2011-07-28 16:31 | 2011-07-29 21:00 |
|
|||||
Reporter: | administrator | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.19 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.24 | ||
Target Version: | 0.1.1.19 | ||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Dialog keyword doesn't get colored properly | ||||
Description: | the 'g' in the dialog doesn't get colored properly | ||||
Steps To Reproduce: | Dialog ssss { title "foobar" size -1 -1 100 100 option dbu } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
28 | [mSLDev] Future Suggestions | feature | N/A | 2011-07-14 10:33 | 2011-07-29 21:00 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.41 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.24 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Update Checker. | ||||
Description: | Would be nice to have an update checker. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
21 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-09 08:41 | 2011-07-29 20:59 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.24 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Indentation Guide | ||||
Description: | Would be nice to have an Indentation Guide. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
34 | [mSLDev] GUI Related | minor | always | 2011-07-24 14:33 | 2011-07-26 18:07 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Can't expand/shrink some events. | ||||
Description: | We have a "arrow" to the right of the line number for some of the event's below, but not others. | ||||
Steps To Reproduce: | on *:text:foo:#: { msg $chan blar } on :START: { echo -a foo } on :LOAD: { echo -a foo } on :UNLOAD: { echo -a blar } on :QUIT: { echo -a asdf } on :invite:#: { } on :action:*:#: { echo -a action } on :chat:*: { echo -a chat } | ||||
Additional Information: | |||||
Attached Files: |
missing arrow.PNG (11,159) 2011-07-24 14:33 http://www.msldev.com/bugs/file_download.php?file_id=6&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
41 | [mSLDev] General (other) | minor | have not tried | 2011-07-24 20:44 | 2011-07-26 18:07 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 32-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | high | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Groups (# prefix) do not like "1-liners" | ||||
Description: | Interpreter claims an "Ill-formed script group" was made, underlining the #foo end line. | ||||
Steps To Reproduce: | ; Broken code: #foo off on 1:TEXT:foo:#:{ msg $chan bar } #foo end ; As opposed to working code: #foo off on 1:TEXT:foo:#:{ msg $chan bar } #foo end | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 32-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
40 | [mSLDev] General (other) | minor | always | 2011-07-24 20:43 | 2011-07-26 18:06 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | high | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Groups (# prefix) do not like "1-liners" | ||||
Description: | Interpreter claims an "Ill-formed script group" was made, underlining the #foo end line. | ||||
Steps To Reproduce: | ; Broken code: #foo off on 1:TEXT:foo:#:{ msg $chan bar } #foo end ; As opposed to working code: #foo off on 1:TEXT:foo:#:{ msg $chan bar } #foo end | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
37 | [mSLDev] Syntax Checking | major | always | 2011-07-24 19:53 | 2011-07-26 18:05 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $ialchan() claiming to be receiving too many parameters. | ||||
Description: | The interpreter is claiming that $ialchan is receiving too many parameters. | ||||
Steps To Reproduce: | $ialchan($wildsite,#,0) | ||||
Additional Information: | Possibly mixed up with usage of $ial() | ||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
32 | [mSLDev] Syntax Checking | minor | always | 2011-07-23 18:36 | 2011-07-26 18:05 |
|
|||||
Reporter: | MaSOuD | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $ialchan() syntax checking error | ||||
Description: | No description specified... | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
38 | [mSLDev] General (other) | minor | always | 2011-07-24 20:09 | 2011-07-26 18:04 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | low | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $remtok() discrepancy between mIRC's interpreter and mSLDev | ||||
Description: | mIRC allows the usage of $(find|rem|rep)tok() without the N parameter; implentation of this would make it rather ambiguous though. The current build of mSLDev shows this usage as underlined. | ||||
Steps To Reproduce: | $remtok(a.b.c.d,b,46) $findtok(a.b.c.d,b,46) $reptok(a.b.c.d,b,34,46) | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
35 | [mSLDev] Syntax Checking | minor | always | 2011-07-24 19:43 | 2011-07-26 18:04 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | normal | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Erroneous underlining | ||||
Description: | An alias which is prefixed with the '-' character claims to be an error, even though it is perfectly fine. | ||||
Steps To Reproduce: | alias -foo { return bar } | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
36 | [mSLDev] Syntax Checking | major | always | 2011-07-24 19:48 | 2011-07-26 18:03 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | high | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $iif claiming to be receiving too many parameters | ||||
Description: | Interpreter believes $iif() is receiving too many parameters. | ||||
Steps To Reproduce: | $iif(!$deltok($readini(mute.ini,$chan,mutes),$findtok($readini(mute.ini,$chan,mutes),$+(~q:,$address($$1,2)),32),32),remini mute.ini $chan mutes,writeini mute.ini $chan mutes) $deltok($readini(mute.ini,$chan,mutes),$findtok($readini(mute.ini,$chan,mutes),$+(~q:,$address($$1,2)),32),32) | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
39 | [mSLDev] General (other) | minor | always | 2011-07-24 20:14 | 2011-07-26 18:00 |
|
|||||
Reporter: | xmrfunny1x | Platform: | Win7 64-bit | ||
Assigned To: | administrator | OS: | Windows 7 | ||
Priority: | high | OS Version: | (6.1) | ||
Status: | resolved | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $regex() discrepancy between mIRC's interpreter and mSLDev | ||||
Description: | $regex() in the mSLDev script editor is showing optional [name] of a regex to be an excessive parameter. | ||||
Steps To Reproduce: | $regex(foo,foobar,/.bar$/) | ||||
Additional Information: | |||||
System Description | This profile is for problems on Microsoft Windows 7 on a 64-bit machine. | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
5 | [mSLDev] Syntax Checking | feature | always | 2011-07-07 08:14 | 2011-07-26 18:00 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.19 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Syntax auto complete issue when a bracket is removed. | ||||
Description: | Auto "(}" does not remove extra "(" or ")" if one or the other is removed. | ||||
Steps To Reproduce: | alias foo { $abs(( } Type the above code, and it will add "))" at the end of the "$abs((". Remove a ")" and the "(" will not be removed. This causes a "No closing brace found on identifier `$abs'. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
15 | [mSLDev] GUI Related | minor | always | 2011-07-08 05:38 | 2011-07-24 23:54 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.12 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Some buttons do not work in "Create a Tool". | ||||
Description: | Can not create: Blank Dialog Script Picture Window Text File | ||||
Steps To Reproduce: | File -> New -> Try and create one of the following. Blank Dialog Script Picture Window Text File This applies to double clicking them, and selecting them and hitting "OK". | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
33 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-24 02:10 | 2011-07-24 02:10 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | OS: | ||||
Priority: | normal | OS Version: | |||
Status: | new | Product Version: | 0.1.1.12 | ||
Product Build: | Resolution: | open | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | |||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Code Cleanup | ||||
Description: | Have an option to detect pointless coding. | ||||
Steps To Reproduce: | Pointless Code: //echo @Window $nick entered $chan just now $+ . The "$+" is pointless, as their is no identifier between "now" and ".". Not pointless: //echo @Window $nick entered $chan $+ . As the "$+" is needed to make it look like "foo entered #foo.", since their is an identifier. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
30 | [mSLDev] General (other) | trivial | always | 2011-07-23 01:05 | 2011-07-23 17:35 |
|
|||||
Reporter: | administrator | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | urgent | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.75 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.12 | ||
Target Version: | 0.0.1.75 | ||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | mSLDev does not properly read or write script files with Unicode text | ||||
Description: | mSLDev does not properly read or write script files with Unicode text | ||||
Steps To Reproduce: | Open a unicode script file. This bug effects INI and mRC files equally. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
29 | [mSLDev] GUI Related | minor | always | 2011-07-14 11:07 | 2011-07-23 17:34 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.41 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.12 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Possible missing Icon. | ||||
Description: | "Untitled1" is a new script file. "Untitled2" is a new dialog file. I think the "Untitled1" is missing an icon next to it. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
missing-icon.PNG (11,421) 2011-07-14 11:07 http://www.msldev.com/bugs/file_download.php?file_id=5&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
27 | [mSLDev] General (other) | minor | have not tried | 2011-07-13 18:48 | 2011-07-23 17:33 |
|
|||||
Reporter: | FelicianoX | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.12 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Select all doesn't work | ||||
Description: | It doesn't work if you go to edit->select all. The about window can be resized. And just a suggestion, would be nice if msldev had something like this built-in: http://forum.swiftirc.net/viewtopic.php?f=34&t=24816 [^] The only problem about it would be if the regex had vars/$N's in it, would make it useless. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
24 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-10 11:10 | 2011-07-23 17:33 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.16 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.1.1.12 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Find & Replace | ||||
Description: | Would be nice to have a Find & Replace. Make it work in all opened scripts also. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
26 | [mSLDev] AutoComplete | minor | always | 2011-07-12 18:51 | 2011-07-13 18:17 |
|
|||||
Reporter: | FelicianoX | Platform: | |||
Assigned To: | administrator | OS: | Vista | ||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.33 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.41 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Identifier Auto Complete | ||||
Description: | When you type $ the dropdown list comes up, if you click on one of them, it adds another $ (making it $$address for example) Also: If you have for example: alias abc return $gettok($1,3,32) and then you click inbetween return and $gettok because you want to add another identifier in there, the dropdown list doesn't show up. tl;dr: identifier autocomplete dropdown only shows when there isn't anything after it. (Sorry for my bad english) | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
25 | [mSLDev] Syntax Highlighting | minor | always | 2011-07-10 11:39 | 2011-07-12 17:43 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.16 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.33 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Comma Highlighting bug. | ||||
Description: | Does not highlight code after first ",". | ||||
Steps To Reproduce: | var -s %a,%b,%c | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
23 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-10 11:07 | 2011-07-12 17:41 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.16 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.33 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $identifier auto complete. | ||||
Description: | Would be interesting to have a $identifier auto complete, type "$a" and have a drop down menu with all the $identifiers begging in "a", and if i type "$al" I see "$alias", and I can press the TAB key or ENTER key. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
12 | [mSLDev] GUI Related | minor | always | 2011-07-08 04:01 | 2011-07-10 04:09 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.16 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Save All - Does not work. | ||||
Description: | The "Save All" (multi-floppy disk image) does not work. | ||||
Steps To Reproduce: | Open 2 or more scripts. Add a random space Click "Save All" Does not save anything. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
14 | [mSLDev] GUI Related | trivial | always | 2011-07-08 05:28 | 2011-07-10 04:06 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.16 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | "?" Question Mark button in About. | ||||
Description: | A "?" question mark button with no use can be seen when looking at the About. | ||||
Steps To Reproduce: | Help -> About | ||||
Additional Information: | |||||
Attached Files: |
msl-question-mark-about.PNG (10,957) 2011-07-08 05:28 http://www.msldev.com/bugs/file_download.php?file_id=2&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
4 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-07 06:54 | 2011-07-09 09:08 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Close All Files | ||||
Description: | We have an "Open All Files", so why not a "Close All Files". | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
17 | [mSLDev] GUI Related | minor | always | 2011-07-08 05:59 | 2011-07-09 09:06 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Some of the edit options are not greyed out. | ||||
Description: | By default mIRC, Notepad, Notepad++, and possibly all other text editors, the Undo/Redo button are greyed out when creating a new file. This is not true in mSLDev. | ||||
Steps To Reproduce: | File -> New -> Script File -> OK -> Edit ... | ||||
Additional Information: | |||||
Attached Files: |
msldev-edit.PNG (9,110) 2011-07-08 05:59 http://www.msldev.com/bugs/file_download.php?file_id=4&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
13 | [mSLDev] GUI Related | minor | always | 2011-07-08 04:04 | 2011-07-09 09:05 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Open - Does not work. | ||||
Description: | The "Open" (file/paper image) does not work. | ||||
Steps To Reproduce: | Just click it, nothing happens. | ||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
10 | [mSLDev] Future Suggestions | minor | N/A | 2011-07-07 19:07 | 2011-07-09 09:05 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Open as Read Only. | ||||
Description: | Option to open scripts as read only, since they could be in use by mIRC. | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
3 | [mSLDev] GUI Related | minor | always | 2011-07-07 06:46 | 2011-07-09 09:03 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Line's switch around, when altering code. | ||||
Description: | In the debug tab, if I sort the debug lines and alter a line that is in the debug tab, the numbers become out of order. | ||||
Steps To Reproduce: | alias foo { if ($nick == foo) d { msg $chan line 2 } else if ($nick == foo1) 68 { msg $chan line 3 } else ($nick == foo2) x { msg $chan line 4 } } Sort the debug tab by Line, then remove the "8" in "68" in line 3. Line numbers are now out of order. | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
8 | [mSLDev] GUI Related | minor | always | 2011-07-07 08:47 | 2011-07-09 09:02 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Line's switch around, when altering code - Messages tab | ||||
Description: | If you sort the messages tab via line number, and alter code, the numbers switch around. | ||||
Steps To Reproduce: | ; TODO - foo ; TODO - asdf ; TODO - fghj Sort them by line number in the Messages Tab. Alter one of them. They are now out of order in the line number | ||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
6 | [mSLDev] GUI Related | tweak | N/A | 2011-07-07 08:20 | 2011-07-09 09:02 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | low | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Ability to copy/paste Debug/Messages Tab | ||||
Description: | When looking at the debug tab, you see information, and are not able to copy it to the clipboard. Possible make this a right click menu, with the option to copy, since Left Click takes you to the line of code in the file. Example: Z:\foo\foo.mrc 4 13 Ident:$abs 123 No closing brace found in identifier `$abs' | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
19 | [mSLDev] Syntax Checking | minor | always | 2011-07-08 23:51 | 2011-07-09 09:01 |
|
|||||
Reporter: | FelicianoX | Platform: | |||
Assigned To: | administrator | OS: | Windows Vista | ||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | $duration debug problem | ||||
Description: | It says in the debug list: too few parameters $duration(%s) Yes, %s does exist and it shouldn't be few parameters :) | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
11 | [mSLDev] GUI Related | trivial | always | 2011-07-08 03:40 | 2011-07-09 09:01 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | "?" Question Mark button in Open All. | ||||
Description: | A "?" question mark button with no use can be seen when doing a a "Open All". | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
msl-question-mark-open-all.PNG (7,535) 2011-07-08 03:40 http://www.msldev.com/bugs/file_download.php?file_id=1&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
18 | [mSLDev] Syntax Checking | major | always | 2011-07-08 18:33 | 2011-07-09 09:00 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Does not report missing "(" or ")". | ||||
Description: | Does not report a missing "(", before "$nick". | ||||
Steps To Reproduce: | alias foo { if $nick == foo) { msg $chan asdf } | ||||
Additional Information: | Also applies for missing ")", if i remove it, and add a "(" to the left of "$nick". | ||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
16 | [mSLDev] GUI Related | trivial | always | 2011-07-08 05:48 | 2011-07-09 08:58 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | normal | OS Version: | |||
Status: | resolved | Product Version: | 0.0.1.0 | ||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.9 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Missing text in right click option | ||||
Description: | Missing text in right click option of the toolbar in a dialog tab. | ||||
Steps To Reproduce: | File -> New -> Dialog -> OK -> Right click in the dialog. | ||||
Additional Information: | |||||
Attached Files: |
msldev-dialog.PNG (8,323) 2011-07-08 05:48 http://www.msldev.com/bugs/file_download.php?file_id=3&type=bug |
There are no notes attached to this issue. |
View Issue Details | |||||
|
|||||
ID: | Category: | Severity: | Reproducibility: | Date Submitted: | Last Update: |
2 | [mSLDev] Future Suggestions | trivial | N/A | 2011-07-07 06:19 | 2011-07-07 08:25 |
|
|||||
Reporter: | KindOne | Platform: | |||
Assigned To: | administrator | OS: | |||
Priority: | high | OS Version: | |||
Status: | resolved | Product Version: | |||
Product Build: | Resolution: | fixed | |||
Projection: | none | ||||
ETA: | none | Fixed in Version: | 0.0.1.0 | ||
Target Version: | |||||
Beta mIRC version?: | |||||
mIRC Version: | |||||
|
|||||
Summary: | Add Version Number/Build Date in Titlebar | ||||
Description: | Just add a Version Number or Build Date in the titlebar, so that its simpler to report bugs in specific version(s). Example, I have 5 versions of the program, and currently can only tell the difference by the "File Modified Date". | ||||
Steps To Reproduce: | |||||
Additional Information: | |||||
Attached Files: |
Notes | |||||
|
|||||
|
|
||||
|
|||||
|
|